Wax Melter – Double Boiler

$545.00$669.00

Australian Manufactured Wax Melters! Perfect for Reducing Wax Cappings – Honey Recovery – Wax Cleaning – Honey Warming/De-crystallisation & more.

* Please note, these units are quite large and freight costs will vary depending on location. The prices listed DO NOT include freight costs from the manufacturer. Please contact us to discuss the best possible delivery pricing and options.

Clear
SKU: N/A Category:

Description

These Australian Manufactured Wax Melters are perfect for Reducing Wax Capping’s – Honey Recovery – Wax Cleaning – Honey Warming/De-crystallisation & more.

Features

  • The fastest heat up times for volume on the market
  • Independent product thermometer for precise monitoring
  • Serviceable
  • Detailed operation instructions
  • Safe and easy to use, clean and maintain

Digital Temperature Controllers make higher product temperatures achievable, and provide precise temperature control. Fast reaction and intelligent operation allows the temperature of the water jacket to be maintained as high as 100’c without rapid boiling. The old capillary style thermostats (Dial Type) are very good, however the slower reaction times means that the temperatures can’t be set higher than 90’c to ensure the water jacket doesn’t rapid boil from temperature runout. Precise temperature control is critical for the production of lip balm, lotions and other wax based value added  products.

Model: 15BD – 15 litre Digital Temperature Controlled Multipurpose Unit 

  • Recommended for 5+ Bee Hives
  • 15ltr internal product chamber – H25cm x W27cm
  • Overall dimensions – H46cm x W37cm
  • Product tap heights – 22cm & 27cm
  • Water jacket temperature range – 30’c – 100’c
  • Cold start product to 85’c in approx. 60 minutes

Model: 25BD – 25 litre Digital Temperature Controlled Multipurpose Unit

  • Recommended for 25+ Bee Hives
  • 25ltr internal product chamber – H30cm x W33cm
  • Overall dimensions – H50cm x W40cm
  • Product tap heights – 18cm & 23cm
  • Water jacket temperature range – 30’c – 100’c
  • Cold start product to 85’c in approx. 120 minutes

Model: 35BD – 35 litre Digital Temperature Controlled Multipurpose Unit

  • Recommended for 50+ Bee Hives
  • 35ltr internal product chamber – H35cm x W37cm
  • Overall dimensions – H56cm x W40cm
  • Product tap heights – 20cm & 25cm
  • Water jacket temperature range – 30’c – 100’c
  • Cold start product to 85’c in approx. 180 minutes

 

Cleaning Wax Guide – Dirty wax capping’s, old foundation and wax from previous cleans.

Add wax capping’s, old foundation and wax from previous cleans to the chamber as well as approximately 30-50mm of clean water.

Set the thermostat temperature to approximately 65c.

Once everything has melted, separated and settled, open the lowest chamber tap to drain off the honey rich water until you see the colour change and wax starts to come out, close the bottom tap, the wax line is now be between the bottom and top chamber taps.

Move up to the top chamber tap and use a small container to check if clean wax is coming out.

Once clean wax is coming out drain clean wax straight into a pouring jug or moulds until the clean wax is exhausted.

Repeat the process until all capping’s and old foundation have been used.

Reducing / Cleaning Straight Capping’s Guide

Reducing and cleaning straight capping’s, is essentially the same process as the cleaning wax guide above with one difference, clean water may not be needed to be added to the chamber as the honey in straight capping’s tends to have enough moisture to melt and separate.

The honey recovered from the capping’s is commonly used for sauces and in cooking,

The Basics

  1. First fill the unit’s water jacket.
  2. Plug into a power outlet.
  3. Select desired temperature on the thermostat.
  4. Heat unit up to temperature.
  5. Add wax/product and heat product to required temperature.
  6. Pour our clean wax.

*Note that units will have some minor marks from the manufacturing processes.

Double Boiling Method explained

An electric double boiler means the unit has a water jacket around the outside of the internal chamber, a thermostat to control heating to a set temperature and an electric heating element to heat the water in the water jacket, wax/product go into the internal chamber and the heated water in the jacket melts/heats/emulsifies/separates depending on the product being used from the base and the sides to the temperature set on the thermostat, being water jacketed the unit is limited to 100’c. The product outlet (tap) will not clog because it passes through the water jacket and is surrounded by hot water heating it.

Temperature is maintained by the thermostat to the set temperature continually allowing the user to spend more time perfecting the finished product.

Basically that’s how a double boiler works, if you would like more information or have any questions feel free to email or send a contact number.

* Please note, these units are quite large and freight costs will vary depending on location. The prices listed DO NOT include freight costs from the manufacturer. Please contact us to discuss the best possible delivery pricing and options.

Additional information

Capacity

15ltr, 25ltr, 35ltr

Reviews

There are no reviews yet.

Be the first to review “Wax Melter – Double Boiler”
0